NEW MimioProjector 280I Interactive Projector

Product Inquiry
SKU: MIMIO PROJECTOR 280I Categories: ,

Description

You know your students live in a world of technology. So you know technology can help hold their attention. But you have a budget. If your classrooms already have dry erase boards but no projectors, the MimioProjector™ interactive projector lets you bring interactive teaching into your classrooms without breaking the bank.

Interactive teaching with the computers and whiteboards you already have.
  • Just mount, plug into a computer, and bring your lessons, graphics, and images to life on a conventional dry erase board.
  • A full-featured solution that includes award-winning MimioStudio™ classroom software.
  • With the two included pens and Windows 7 or higher*, two students can simultaneously interact with the same projected image,enhancing collaborative learning.
  • NEW: Up to ten pens may be used simultaneously by buying additional pens from Mimio.
  • Ultra-short-throw design reduces shadows on the whiteboard.
  • Bulb can be replaced without dismounting the MimioProjector device. Up to 5,000 hours between bulb replacements.
  • NEW: Even brighter and more vibrant images with 3100 lumens.

What’s Included
Projector, interactive module, 2 interactive pens, MimioStudio software license, 2-m power cord, 2-m VGA cable, 5-m mini-USB cable, remote with battery, Wall-Mount.

Software Requirements MimioStudio 11 and higher on a Windows, Mac, or Linux OS
Brightness 3100 lumens
Lamp 280 Watt OSRAM E20.9n (replaceable without dismounting projector)
Lamp Life* Normal mode: 3000 hours minimum. Eco mode: 5000 hours minimum.
Native Aspect Ratio 16:10. Also supports 4:3 and 16:9 aspect ratios.
Native Resolution 1280 x 800 (WXGA)
Image Size Supported WXGA 16:10, 70” – 130”
Keystone Correction Vertical: ±15 degrees (manual)
Contrast Ratio Native 2000:1
Color Reproduction 1.07 billion colors (R/G/B 10 bit)
Color Temperature Adjustable from 6500º K – 8300º K
Color Uniformity -|ΔU’V’| <0.03
Projection Lens F 2.6 fixed zoom
Throw Ratio Range WXGA 0.35
Zoom Ratio Digital zoom 1.0 – 2.0X
Focus Type Manual
Projection System Digital Light Processing (DLP), utilizing a 6-segment color wheel.
Projection Method Front / Wall Mount, Tabletop Mount
Input Signal NTSC/PAL/SECAM video capability with S-video / composite / YPbPr Component
Resolutions 1080p/UXGA/WXGA/XGA/SVGA/MAC compatibility
Video Inputs 1 HDMI, 2 VGA, 1 S-video, 1 composite analog
LAN Control Protocols Creston/AMX/PJ Link
Closed Captioning Based on TI DDP4421 spec, CC1/CC2/CC3/CC4 supported
3D Capabilities DLP Link 3D and HDMI 1.4a 3D supported
Audio Two 3.5-mm stereo line level, two stereo RCA jack line level, one 3.5-mm audio out, one 3.5-mm microphone.
Input sensitivity 1 kHz, 0.5 Vrms sine wave
Speaker 8 watts stereo (16 watts total output)
Operating Temperature 5 – 40° C (41 – 104° F)
Humidity Operating and Storage: 80% RH (Max.), Non-condensing
Fan Noise Full mode: 37±2dB (A), w/o filter ECO mode: 33±2dB (A), w/o filter
Power Supply Voltage Universal AC 100 – 240 V~50-60 Hz with PFC input
Power Consumption Normal Mode: 350 W+/-10%@110 VAC ECO Mode: 290 W+/-10%@110 VAC Standby: < 0.5 W
Interactive Technology 560 x 1920 (interpolated); 640 x 480 (Native)
Detection Frame Rate 60 fields-per-second providing 16.6 ms response time
Interactive Area 75” to 115” diagonal
Tracking Resolution 2560 x 1920 (interpolated); 640 x 480 (Native)
Interactive Devices Pen (2 inlcuded) or finger
Pen Attributes 15.2 cm L x 1.5 cm W (6.0 in. L x 0.6 in. W), 34 g (1.2 oz) (without battery)
Interactive Connectivity mini-USB cable provided
Visible Alignment Lasers (3 adjustment levels) Wavelength 650 nm (nanometers) Optical power < 0.39 mW (milliwatt) Dot size at focus distance 10 mm
Security Kensington lock ≥36 Kg

MimioProjector IR Module